Differential Pressure Gauge (2000 Series) -차압계

제품 간략소개

본 계기는 압력접속구가 L(저압측)과 H(고압측)가 있으며 2개소의

압력차(차압)를 지시하는 것으로써 차압의 측정은 물론, 그 측정 된 차압으로 측정에 사용할 수 있습니다.

제품 특징

※ 필터의 막힘 여부를 측정할 수 있음.

제품사양

Service: Air and non-combustible, compatible gases. (Natural Gas option available.)
Wetted Materials: Consult factory.
Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test. Accuracy: ±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits: -20˝ Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option:35 psig (2.41 bar), HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar),standard gages only.
Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).
Size: 4˝ (101.6 mm) Diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8˝ female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Standard Accessories: Two 1/8˝ NPT plugs for duplicate pressure taps, two 1/8˝ pipe thread to rubber tubing adapter and three flush mounting adapters
with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)
*Low temperature models available as special option.
†For applications with high cycle rate within gage total pressure rating, next higher rating is recommended.
See Medium and High pressure options at lower left.

제품명	규격	치수(mm)
Series 2000	0 ~50 mmAq	113.89 ￠ x 42.86